Contact US For Quotation | Email:464560351@qq.com | Whatsapp&Wechat:+8618620373879 |
Musktool-ZC75 Series Programmable Withstand Voltage/Insulation Resistance Tester
Description
Brief introduction
The ZC75 series AC and DC withstand voltage/insulation resistance tester is a newly designed 200VA power with a maximum output of 10kV/20mA, which meets the requirements of high withstand voltage testing. Based on the basic AC, DC, and insulation resistance tests, the ZC75 series adds a breakdown voltage test function, which can analyze the breakdown point voltage of the product; It has an open and short circuit detection function (OSC), which solves the problem of users when testing safety products. For reliability and accuracy issues, the contact check is performed synchronously during output to avoid missed detection and improve the reliability and efficiency of the test. |
Performance characteristics
High voltage output: AC 10kV/20mA; DC 12kV output Chinese and English interface 7-inch large LCD, larger and clearer fonts Unique arc detection function, defect identification is more accurate OSC check function, more reliable and accurate Voltage slow rise function, can test the voltage when the product breaks down Multiple interfaces, standard RS32, USB HOST, USB DEVICE HANDLER LAN GPIB (optional) to facilitate automated testing of production lines There are output ports on the front and rear panels, suitable for various test scenarios Store 6 groups, each group has 10 steps |
Scope of application
Coil components such as transformer motors, rotors, stators, etc. Electronic components such as capacitors, filters, transformers, etc. Electrical products such as household appliances, electronic products, electric heating products, lighting products, medical equipment, etc. Non-electrical products such as wires, non-woven fabrics, insulating materials, etc. |
Technical index
Model | ZC7510C | ZC7510 | ||
Test mode | DC/IR | AC/OSC | ||
The output voltage | AC | voltage range | - | 0.05-10.0KV |
Voltage waveform | 50/60Hz±0.1%,sine wave | |||
Output Power | 200VA(10.0KV/20mA) | |||
DC | voltage range | 0.05-12.0KV | - | |
Output Power | 120VA(12.0KV/10mA) | |||
Load fluctuation rate | ±(1% set value + 0.2% full scale) (rated power) | |||
Voltage resolution | 2V | |||
Voltage accuracy | ±(1% set value+ 0.1% full scale) | |||
Current test range | AC | Current range | - | 0.001mA~20mA |
Current resolution | 0.001mA | |||
Current accuracy | ±(1% read value + 0.5% full scale) | |||
DC | Current range | 0.001mA~10mA | - | |
Current resolution | 0.001mA | |||
Current accuracy | ±(1% read value + 0.5% full scale) | |||
Maximum short circuit current | 20mA (AC only test) | |||
Fast discharge function | Automatic discharge after the test is over(DCW) | |||
Insulation resistance test(Included in ZC7510 only) | ||||
The output voltage | DC:0.05~5.0kV | |||
Voltage resolution | 2V | |||
Voltage accuracy | ±(1% read value + 0.1% full scale) | |||
Resistance test range | 0.1MΩ~ 50.0GΩ | |||
Arc Detection | ||||
Program settings | AC | - | 1.0mA~20.0mA | |
DC | 1.0mA~10.0mA | - | ||
OSC Open and short detection | ||||
Sampling Standard Capacitance Range | 0.001~40nF | |||
Open circuit judgment range | 10%~100% | |||
Short circuit judgment range | 100%~500% | |||
Time setting | ||||
Testing time | 0.1~999.9s,0 Indicates continuous testing | |||
Rise Time | 0.1~999.9s,0 means close | |||
Fall time | 0.1~999.9s,0 means close | |||
waiting time | 0.1~999.9s,0 means close(only ZC7510C) | |||
Safety protection function | ||||
Electric shock protection | 0.5mA±0.25mA,Selectable: On or Off | |||
Boot protection | Interlock pin to ground,Only allow high voltage output | |||
Panel operation protection | key lock, password | |||
Storage and interface | ||||
Internal memory | Can store 6 groups of files, each group can be edited in 10 steps | |||
Standard interface | RS232、USB DEVICE、USB HOST、LAN、HANDLER | |||
General technical indicators | ||||
volume | 430mm(W)×132mm(H)× 500mm(D) | |||
weight | 25Kg |