Contact US For Quotation | Email:464560351@qq.com | Whatsapp&Wechat:+8618620373879 |
Musktool-ZC73 Series Programmable Voltage/Insulation Resistance Tester
Description
Brief introduction
The ZC73 series AC and DC withstand voltage/insulation resistance tester is a newly designed 500VA high-power with a maximum output of 5kV/100mA, which meets the requirements of high-power withstand voltage testing and meets the equipment safety standards of EN50191. Based on the basic AC, DC, and insulation resistance tests, the ZC73 series adds a breakdown voltage test function, which can analyze the breakdown point voltage of the product; it also has an open and short circuit detection function, which solves the user’s reliability when testing safety products. For issues of performance and accuracy, contact inspections are performed synchronously during output to avoid missed inspections and improve test reliability and efficiency. At the same time, the floating output design, electric shock protection function, etc., will not be injured by electric shock even when the high voltage test terminal is accidentally touched, which protects the safety of the operator and has no worries during operation. |
Performance characteristics
High power: AC 5kV/100mA; DC 6kV output Chinese and English interface 7-inch large LCD, larger and clearer fonts High-voltage floating output, in line with European standard EN50191 Unique arc detection function, defect identification is more accurate Voltage slow rise function, can test the voltage when the product breaks down Multiple interfaces, convenient for automated testing of production lines Store 6 groups, each group has 10 steps |
Scope of application
Coil components such as transformer motors, rotors, stators, etc. Electronic components such as capacitors, filters, transformers, etc. Electrical products such as household electrical, electronic products, electric heating products, lighting products, etc. Non-electrical products such as wires, non-woven fabrics, insulating materials, etc. |
Technical index
model | ZC7310 | ZC7310C | ||
Pressure test | ||||
The output voltage | AC | voltage range | 0.05~5.0kV | |
Voltage waveform | 50/60Hz±0.1%,Sine wave | |||
Output Power | 500VA(5.0kV 100mA) | |||
DC | voltage range | 0.05~6.0kV | - | |
Output Power | 150VA(6.0kV /25mA) | |||
Load fluctuation rate | ±(1% set value + 0.2% full scale) (rated power) | |||
Voltage resolution | 2V | |||
Voltage accuracy | ±(1% set value + 0.1% full scale) | |||
Current test range | AC | Current range | 0.001mA~120mA(Voltage≤4kV) 0.001mA~100mA(Voltage>4kV) | |
Current resolution | 0.001mA | |||
Current accuracy | ±(1% read value+ 0.5% full scale) | |||
DC | Current range | 0.001mA~25mA(Voltage≥1.5kV) 0.001mA~20mA(Voltage<1.5kV) | - | |
Current resolution | 0.1uA | |||
Current accuracy | ±(1% read value + 0.5% full scale) | |||
Maximum short circuit current | 200mA (AC only test) | |||
Fast discharge function | Automatic discharge after the test is over(DCW) | |||
Insulation resistance test(Included in ZC7310 only) | ||||
The output voltage | DC:0.05~5.0kV | |||
Voltage resolution | 2V | |||
Voltage accuracy | ±(1% read value + 0.1% full scale) | |||
Resistance test range | 0.1MΩ~ 50.0GΩ | |||
Arc Detection | ||||
Program settings | AC | 1.0mA~20.0mA | ||
DC | 1.0mA~10.0mA | |||
OSC Open and short detection | ||||
Sampling Standard Capacitance Range | 0.001~40nF | |||
Open circuit judgment range | 10%~100% | |||
Open circuit judgment range | 100%~500% | |||
Time setting | ||||
Testing time | 0.1~999.9s,0 Indicates continuous testing | |||
Rise Time | 0.1~999.9s,0 Means close | |||
Fall time | 0.1~999.9s,0 Means close | |||
Waiting time | 0.1~999.9s,0 Means close (Only ZC7310) | |||
Safety protection function | ||||
High voltage floating output | Test mode | ACW、DCW、IR | - | |
leakage current | <3.5mA AC/DC | |||
Electric shock protection | 0.5mA±0.25mA,optional:open or close | |||
Boot protection | Interlock pin to ground,Only allow high voltage output | |||
storage and interface | ||||
Internal memory | Can store 6 groups of files, each group can be edited in 10 steps | |||
Standard interface | RS232、USB DEVICE、USB HOST、LAN、HANDLER | |||
General Indicators | ||||
olume | 430mm(W)×132mm(H)× 500mm(D) | |||
weight | 25kg |