English
| Contact Us for Quotation | Email：464560351@qq.com | Whatsapp: +8618620373879 |
Principle Introduction
The sensing material of Musktool-MIX1007B is tin dioxide SnO2, which has low conductivity in clean air. When the Carbon Monoxide(CO) gas exists, the conductivity of the sensor will be raise according to the gas concentration goes up. Through a simple circuit, to convert the changes of conductivity to correspond to the gas concentration. MIX1007B Carbon Monoxide(CO) Gas Sensor has high sensitivity to carbon monoxide. The sensor can work in high temperature. It is low cost sensor and can be used in different applications. |
Features
High sensitivity to wide range of carbon monoxide High sensitivity Long life and low cost High anti-seismic |
Application
Domestic gas leakage detectors Portable gas detectors |
Technical Parameters
| Item | Specification |
| Target Gas | Carbon monoxide |
| Measurement Range | 10~500ppm CO |
| Heater Voltage(VH) | 5.0V±0.1V AC or DC (high temp.) 1.5V±0.1V AC or DC (low temp.) |
| Heater Time(TL) | 60 S±1S (High temp.) 90 S±1S (Low temp.) |
| Load Resistance | Adjustable |
| Loop Voltage | ≤24V DC |
| Heater Resistance(RH) | 30Ω±3Ω(Room temperature) |
| Heater Power Consumption(PH) | ≤900mW |
| Sensitivity | RS(in air)/RS(150ppm CO)≥ 5 |
| Output In Target Gas | 2.5~4.3V(in 150ppm CO) |
| Concentration Slope(α) | ≤0.6(R300ppm/R50ppm CO) |
| Testing Condition | 20℃±2℃；55%±5%RH |
| Oxygen concentration in used place | 21%, no less than 18% If used in low oxygen concentration, pleasure contact for detail |
| Life Expectancy | 10 years |
