China Testing Instruments Manufacturer,Whatsapp/Wechat:+8619928310111  Email:

Musktool-LHW-3A CO2 Laser Obstacle Remover
Musktool-LHW-3A CO2 Laser Obstacle Remover
Musktool-LHW-3A CO2 Laser Obstacle Remover
Musktool-LHW-3A CO2 Laser Obstacle Remover
Musktool-LHW-3A CO2 Laser Obstacle Remover
Musktool-LHW-3A CO2 Laser Obstacle Remover

Musktool-LHW-3A CO2 Laser Obstacle Remover

2023-07-07 08:35:43  

Model: Musktool-LHW-3A Working Distance: 5-150m Working Objects: Transparent plastic film, kite, fishing line, advertising cloth, honeycomb, bird's nest, agricultural film, plastic bags and other non-metallic hangings and removal of small tree barriers

  • Main Feature :
  • Serial No. :
Contact Us for QuotationEmail:464560351@qq.comWhatsapp: +8618620373879

Product Introduction

Musktool-LHW-3A, a portable laser obstacle remover, introduces the laser remote ignition technology into power grid system for the first time.


1. The whole machine is in small size with high working precision and efficiency
2. Easy to operate, intuitive interface, user-friendly operation
3. Long service life, maintenance-free, can adapt to harsh environments
4. Configured with CO2 RF laser, it has high electro-optic conversion efficiency and low power consumption for the whole equipment.
5. High degree of integration and automation, can work for long time reliably with good stability.
6. With green light pointer and protective functions like overheating for laser and resistance of electromagnetic interference.

Product Parameters

Model: Musktool-LHW-3A
Output power: 100W adjustable
Setting time: ≤5 mins
Focused spot size: ≤20mm
Working distance: 5-150m
Continuous working time: ≥90 mins
Wavelength: 10640±5nm
Cooling: Air-cooled
Focus mode: Dynamic focus
Green laser pointer: 20-30mW
Positioning: Auto-positioning
Power supply mode: Rechargeable battery
Electronic telescope: 5-20 digital zoom

Problems  and Solutions

Fault analysis and troubleshooting

Pressing the start button, the device does not start

Check if the mergency stop switch is turned on, if the key switch is turned on, if the base of the platform touches the limit, and whether the platform and the laser are in standby state.

The laser does not fire and screen shows“ Abnormal temperature”

It is caused by temperature of the laser exceeding the allowable range, the laser shuts down automatically. Restart after several minutes of shutdown. If the alarm is still on, please check if the main cabinet cooling fan is blocked or not activated.

The laser does not fire, but the power display is normal

Check the indicator lights on both sides of the power display screen. When the laser light ( the red one at right side) is on and the power indicator ( left side) is off, it indicates that the laser starts protection state because the laser temperature is too high. Turn it off for a few minutes and then turn it back on. The machine is on, and then turn on the laser once the heat of the laser is appropriately decreased.

Platform doesn’t response when press the button on keyboard

Check if the equipment is on, if the antenna is well plugged in, if the power switch of the remote control is on, and whether the remote control battery is dead.

No display on the remote control screen

Check if the remote control switch is on, whether the data line is plugged in or loosened, if the SD card is plugged in, and if the remote control battery is dead.

How to clean the equipment

In order to ensure system works normally, it is necessary to carry out daily cleaning and maintenance of the equipment. This machine is a precision equipment, which requires extra care in maintenance. After each usage, clean it with powder-free rubber gloves, velvet-free cleaning cloth and cotton swabs, pure ethanol, alcohol (optical grade, purity greater than 99.5%), compressed air (oil-free, water-free) and other tools. Place the laser aiming head back into the main cabinet after wiping off the shell of it, the platform, display and so on. Please refer to the product instructions for details.

QQ Chat