China Testing Instruments Manufacturer,Whatsapp/Wechat:+8619928310111  Email:

Musktool-ZC2876/ZC2877/ZC2878 high frequency LCR digital bridge
Musktool-ZC2876/ZC2877/ZC2878 high frequency LCR digital bridge
Musktool-ZC2876/ZC2877/ZC2878 high frequency LCR digital bridge
Musktool-ZC2876/ZC2877/ZC2878 high frequency LCR digital bridge

Musktool-ZC2876/ZC2877/ZC2878 high frequency LCR digital bridge

2023-08-11 08:29:09  

high frequency LCR digital bridge

  • Main Feature :
  • Serial No. : Lisa0539
Contact US For Quotation  Whatsapp&Wechat:+8618620373879

Musktool-ZC2876/ZC2877/ZC2878 high frequency LCR digital bridge


Brief introduction

The high-frequency precision bridge is a multi-function component tester for testing various electronic components. It uses the most popular 7-inch 800x480 color TFT LCD display, which enables users to read test results more intuitively and comfortably. It is an impedance measuring instrument with high speed, wide test range and 6-bit test resolution, which can meet the requirements of production line quality assurance, incoming inspection and laboratory measurement.

Performance characteristics

Four parameter display, any combination of parameters, up to 12 measurement parameters

7-inch 16:9 TFT LCD display, resolution 800x480 RGB

0.05% basic measurement accuracy, fast test speed (200 times/sec)

20Hz-5MHz test frequency, resolution 10 mHz

Up to 200 times/s measurement speed

Automatic level control ALC function of test voltage or current

30 Ω, 100 Ω, 50 Ω, 10/CC four different signal source output impedance

Built-in comparator, 10 file sorting and file counting function

Frequency response curve drawing analysis function

10-point list scan function

Internal -5V~+5V DC bias voltage source

Optional ±10V (±100mA) and 1 A internal DC bias source

100 sets of internal setting files are saved or recalled, and 500 sets of test files are saved or recalled by U disk

The instrument software version can be upgraded and updated through USB HOST

U disk can support format FAT16, FAT32 file system

Standard RS232C, HANDLER, USB HOST, headphone interface, optional GPIB, LAN interface

Technical index

Operating temperature, humidity


Power requirements


99V-121V  198V-242V



Power consumption


Volume (W*H*D)



About 9kg

Technical Parameters

Instrument model




Measurement function

Test parameters

|Z|,|Y|,C, L,X,B,R,G,D,Q,θ,DCR

Basic measurement accuracy



Equivalent Circuit

Series Parallel

Math function

Absolute deviation

Range method

Automatic, hold, manual selection

Trigger method

Internal, manual, external, bus

Measuring speed (≥1kHz)

Fast: 75 times/sec (fastest)
Medium speed: 50 times/sec
Slow speed: 5 times/sec

Fast: 200 times/sec (fastest)
Medium speed: 40 times/sec
Slow speed: 5 times/sec

Average times


Delay time

0-60s, step by 1ms

Calibration function

Open circuit / short circuit / load

Test terminal configuration

Five ends

List scan

10-point list scan function

Display method

Direct reading, Δ, Δ%, V/I (measured voltage/current monitoring)


6-bit resolution, 800×480 RGB 7-inch 16: 9 TFT LCD display

Test signal

Test signal frequency

20 Hz-1MHz, 10mHz resolution

20 Hz-2MHz, 10mHz resolution

20 Hz-5MHz, 10mHz resolution

Output impedance

30Ω, 100Ω, 50Ω, 10/CC can be selected

Test signal level

Normal: 5 mV-2V
Accuracy: 10%, 1 mV step
Constant level: 10 mV-1 V Accuracy: 5%, 1mV step

Normal: 5 mV-5V Accuracy: 10%, 1 mV step
Constant level: 10mV-1V Accuracy: 5%, 1mV step

DC bias source



0V-5V continuously adjustable, 1mV step


ZC6802A: 0-10V DC bias voltage, 0-100mA DC bias current

ZC6802B: 0-1A DC bias current

Display range

|Z|, R, X

0.01m Ω — 99.9999 MΩ


1 mΩ — 99.9999 MΩ

|Y|, G, B

0.00001µS — 99.9999 S


0.00001 pF — 9.9999 F


0.00001 µH — 9999.99 H


0.00001 — 9.9999


0.00001 — 9999.9

θ (DEG)

-179.999°— 179.999°

θ (RAD)

-3.14159 — 3.14159


Comparator function

Ten files: (Nine files are qualified, one file is unqualified), and there is an auxiliary file AUX


100 sets of internal instrument settings for storage/recall


RS-232C, HANDLER, GPIB(optional), LAN (optional), USBTMC, USBCDC

QQ Chat