Contact Us For Quotation | Email: 464560351@qq.com | Whatsapp&Wechat:+8618620373879 |
Xtester-TXR1012
Xtester-TXR1012 series high voltage power supply is a special power supply for small volume X-ray machine.It integrates a filament power supply with an output DC of 5V and an adjustable current of 0.3 A to 3.5 A. High voltage and filament current can rise steadily. Typical Application:Liquid level detection, Thickness measurement, PCB board inspection,Kevex, Oxford, RTW, Superior,Varian, Trufocus,Cathode-grounded X-ray tube. |
FEATURES
· Maximum output voltage 50kV/65kV · Adjustable integrated filament power supply · Overvoltage and short circuit protection · Voltage and current regulation · Local and remote emission control · Security interlock function · DB15 Rs-232 Or Rs-485 Communication Policy Available · OEM customized available |
PRODUCT SPECIFICATIONS
Input DC24V ± 10%. Output 50kV/65kV at 0 to 2mA to a maximum of 65 watts. Voltage control Inside the power supply The multi-turn potentiometer of the power supply can set the output voltage between 0 and the highest voltage. External remote control The external 0 to 10V control signal can adjust the output from 0 to the maximum output voltage. Emission current control Inside the power supply The multi-turn potentiometer of the power supply can set the electron beam current from 0 to the highest current. External remote control The external 0 to 10V control signal can set the electron beam current from 0 to the highest current. DC filament power supply The output current is 3.5A adjustable and the voltage is 5V adjustable. Voltage regulation Load 0.01% of output voltage no load to full load. line ±0.01% for ±10% change in input voltage. Current adjustment load 0.01% of output current from 0 to rated voltage. line ±0.01% for ±10% change in input voltage. Ripple voltage Under rated output conditions, the peak-to-peak value of ripple voltage is 0.1% of the maximum output voltage. Environmental Operational 0 ℃ to + 50 ℃. Storage -40 ℃ to + 85 ℃. Temperature coefficient below 100ppm/℃. Stability less than 0.05% every 8 hours after 1/2 hour warm-up. Voltage and current monitors 0 to + 10Vdc proportional 0 to rated output. Accuracy ± 1%. Dimensions 50kV 73.5 mm wide, 127mm high and 203.5 mm deep. 50kV(SIC options) 73.5 mm wide, 145mm high and 203.5 mm deep. 65kV(SIC options) 73.5 mm wide, 145mm high and 228 mm deep. High Voltage Connector The power supply comes standard with a recessed epoxy insulated duct and a probed high voltage cable connected by a 16mm diameter metal connector. Standard high voltage cable is 1 meter long, and other specifications of cables or joints can be customized. Optional features XCC XRM Compatible HV Cable GB Grid bias SIC Standard interface control |